CustomCutLighting

Hand crafted in the USA

Welcome!

We create one-of-a-kind handmade custom ceramic lighting

Every piece is handcrafted to order, using durable materials, vibrant fired-on glazes, and UL-listed hardware for safe installation

Please allow approximately 4–8 weeks for production, as each piece is handmade to order with a lot of love and care.
Thank you for supporting our dream and handmade artistry!
— Custom Cut Lighting

How it's done

Phase 1

Please complete the contact form.
Owner and Artist, Collette, will collaborate with you for a custom design.

She will create a draft of the artwork & send to you for your approval before beginning your creation.

Phase 2

Once approved, liquid clay is poured into the selected mold.

When the desired thickness is achieved, we drain the "slip" and separate the mold from the product.

Phase 3

It is then handed over to Collette to cut your design.

Your item is then left to sit and dry at room temperature for several days.

Phase 4

It is then inspected for imperfections, sanded and prepped for its first firing in the kiln at almost 2000 degrees. This process takes 12-14 hours and then another couple of days to cool down for handling.

Phase 5

The piece will then have 3+ coats of glaze carefully applied and fired in the kiln one more time.
Each firing results in a distinctive finish, ensuring that no two pieces are alike.

Once finished, the item is meticulously packaged and delivered to the carrier.

Contact

How it's done

Phase 1

Please complete the contact form.
Owner and Artist, Collette, will collaborate with you for a custom design.

She will create a draft of the artwork & send to you for your approval before beginning your creation.

Phase 2

Once approved, liquid clay is poured into the selected mold.

When the desired thickness is achieved, we drain the "slip" and separate the mold from the product.

Phase 3

It is then handed over to Collette to cut your design.

Your item is then left to sit and dry at room temperature for several days.

Phase 4

It is then inspected for imperfections, sanded and prepped for its first firing in the kiln at almost 2000 degrees. This process takes 12-14 hours and then another couple of days to cool down for handling.

Phase 5

The piece will then have 3+ coats of glaze carefully applied and fired in the kiln one more time.
Each firing results in a distinctive finish, ensuring that no two pieces are alike.

Once finished, the item is meticulously packaged and delivered to the carrier.

Tell Us About Your Project

Subscribe to get exclusive updates

How it's done

Phase 1

Please complete the contact form. Owner and Artist, Collette, will collaborate with you for a custom design. She will create a draft of the artwork & send to you for your approval before beginning your creation.

Phase 2

Once approved, liquid clay is poured into the selected mold. When the desired thickness is achieved, we drain the "slip" and separate the mold from the product.

Phase 3

It is then handed over to Collette to cut your design. Your item is then left to sit and dry at room temperature for several days.

Phase 4

It is then inspected for imperfections, sanded and prepped for its first firing in the kiln at almost 2000 degrees. This process takes 12-14 hours and then another couple of days to cool down for handling.

Phase 5

The piece will then have 3+ coats of glaze carefully applied and fired in the kiln one more time. Each firing results in a distinctive finish, ensuring that no two pieces are alike. Once finished, the item is meticulously packaged and delivered to the carrier.

Tell Us About Your Project

Subscribe to get exclusive updates

Please complete the contact form.
Owner and Artist, Collette, will collaborate with you for a custom design.

She will create a draft of the artwork & send to you for your approval before beginning your creation.

Once approved, liquid clay is poured into the selected mold.

When the desired thickness is achieved, we drain the "slip" and separate the mold from the product.

It is then handed over to Collette to cut your design.

Your item is then left to sit and dry at room temperature for several days.

The piece will then have 3+ coats of glaze carefully applied and fired in the kiln one more time.
Each firing results in a distinctive finish, ensuring that no two pieces are alike.

Once finished, the item is meticulously packaged and delivered to the carrier.